ZT-2030T-LB treadmill printing machine adopts microcomputer type single-chip microcomputer control system, all cast aluminum body, small and light, but high precision. It is mainly suitable for printing all kinds of small flat products, and it is suitable for printing any plane material, such as glass, paper, wood, plastic, paper, cutting piece, etc.
Introduction to ZT-2030T-LB electric printing press precision screen printing machine:
1. The micro screen printing machine adopts single-chip microcomputer and touch panel to compile action program; the control panel is clear and clear, the operation is simple, and the display is in Chinese and English.
2. Four digit counter, count printing quantity; clearly display current output.
3. Full cast aluminum body with metal paint on the surface;
4. Double column lifting structure, stable and high precision;
5. Pneumatic screen washing device; simple and convenient, no need to manually lift the printing head, one button screen washing.
6. The left and right travel is adjustable, and the limit of Taiwan Yangming photoelectric switch;
7. The angle of scraper / ink returning knife can be adjusted arbitrarily;
8. Scraper constant pressure device to ensure stable pressure in printing;
9. The worktable is right, front and rear, left and right, and the rotation angle is fine tuned;
10. The mesh frame can be adjusted from front to back, left and right, horizontally and vertically;
11. Suction stainless steel table to absorb various film products;
12. Taiwan CEC oil buffer is equipped at the top, bottom, left and right to effectively eliminate printing vibration;
13. The whole machine runs fast and stably with low noise;
14. Action mode selection: fully automatic, semi-automatic and manual;
15. Operation mode: panel pedal switch; two operation modes,
16. Scraper pressure control: constant pressure of pressure regulating valve;
17. Up and down driving mode: pneumatic;
18. Left and right driving mode: pneumatic;
Product specification of ZT-2030T-LB precision screen printing machine:
Table size: 112-112 mm
Screen size: 200-400mm
Printing speed: 800-1000pcs / HR
Power supply: 220 V 60 / 50 Hz 50 W
Air source requirement: 5 / 6 litre / min (6 bar)
Dimensions: 250 x 550 x 450mm
Machine weight: 100kg
1, Safety performance of machine operation:
ZT-2030T-LB treadmill printing press is in line with the latest engineering style. If it is used as required, it is absolutely reliable.
The machine is equipped with an emergency switch: press the emergency switch in case of emergency, and the machine will be cut off immediately. When the emergency switch is turned on, it can be turned back to the normal position.
But in the following circumstances, there is still a risk!
(1) When the machine needs to be moved or repaired, the power supply and air source must be cut off.
(2) When adjusting or cleaning the oil scraper, follow the steps.
(3) Enhance the awareness of fire prevention and provide fire fighting equipment.
Audited Supplier 
){kind=link}
){kind=link}