UV LED Curing Machine for Drying Production Line of Large Tunnel Furnace

• Customization: Available
• Type: Air Spray Equipment
• Coating: Paint
• Model NO.: ZT-UVLED200100-3
• Certification: CE, ISO, RoHS, REACH
• Method Type: Automatic
• Condition: New
• Transport Package: Ocean Shipping
• Specification: 1200mm*420mm*530mm
• Origin: Dongguan
• Production Capacity: 1000

Product Description

Machine maintenance:
1. Clean the dust on the surface and keep the body clean.
2. When starting the machine, check whether the fan and motor operate normally and whether there is any abnormal sound. If there is any abnormal sound, shut down the machine immediately and inform the maintenance worker for maintenance.
3. After turning on the lamp, check whether the UV lamp has been turned on. If it is found that the UV lamp has not been turned on, inform the maintenance worker for maintenance.
Monthly maintenance of UV curing machine
1. Check whether the vent is blocked and clean up the dust.
2. Check whether the lamp current is normal and whether the circuit is aging.
3. Check whether the fan and motor operate normally, and whether the motor speed regulation can meet the working requirements of UV curing machine.
4. Add oil to the drive chain and sprocket.
5. Whether the light intensity of UV lamp can meet the working standard, and whether the lamp is aging.
6. Clean the dust inside.
Half year maintenance of UV curing machine
1. Check whether the circuit and switch are normal.
2. Refuel the motor gearbox.
3. The insulation of transformer shall not be less than 5 megohm. If not, the transformer must be dried again.
4. Wipe the reflector with soft rag and alcohol.
5. Whether the transmission shaft and sprocket are loose, and whether the two sprockets are vertical.
6. Whether the tightness of mesh belt is appropriate